PTFE Wire Sleeve

Get a Price/Quote

PTFE Wire Sleeve Specification

Conductor Type
Stranded/Solid core supported

Cable Length
Customizable lengths

No Of Core
Single core sleeve (covers one wire at a time)

Connector Type
Not applicable (sleeve only)

Temperature
-65C to +260C

Product Type
PTFE Wire Sleeve

Material
Polytetrafluoroethylene (PTFE)

Function
Electrical insulation and protection

Usage
Wire Harnessing, Electrical Wiring, Cable Protection

Voltage Surge
Up to 2 kV

Frequency (MHz)
DC to several MHz

Rated Voltage
600 V

Rated Current
Dependent on wire size and application

Cable Capacity
Varies as per size (typically for 1 to 50 mm2 wires)

Insulation Material
PTFE

Conductor Material
Copper/Aluminium wires compatible

Length
Standard 1 m to 100 m roll, customizable

Size
Available in 0.5 mm to 25 mm inner diameter

Color
White, Transparent (other colors upon request)

Diameter
0.5 mm to 25 mm (inner)

Application
Electronic, Automotive, Aerospace, Medical Equipment, Electrical Panels

Dielectric Strength
>18 kV/mm

Water Absorption
<0.01%

Flexibility
High

Chemical Resistance
Excellent - Resistant to most solvents and chemicals

Tensile Strength
15-30 MPa

UV Resistance
Excellent

Outer Surface
Smooth, Glossy

Flame Retardant
Yes, UL 94 V-0 Rated

Packing Type
Roll, Spool, or Customized Packing

Specific Gravity
2.1 - 2.2

Inner Surface
Smooth

Thermal Conductivity
0.25 W/mK

Shelf Life
Virtually unlimited if stored properly

Non-Stick Surface
Yes; PTFE characteristic

About PTFE Wire Sleeve

AS per JSS 54802 MIL-122129 these offer all the advantages of PTFE insulation and are available in bore of 0.5 mm to 30 mm wall thickness from 0.25 mm,0.3 mm,0.4 mm. The ususually smooth inside and outside and free from soldering iron damage permits an even greater size reduction compleate color range is available.

Tell us about your requirement